Manually Setting the Camera Selection

If you do not use an official Raspberry Pi camera or don't want to use camera auto detection, you need to configure the config.txt file.

If you use the latest Bookworm system, you need to configure /boot/firmware/config.txt.

If using the Bookworm system:

sudo nano /boot/firmware/config.txt

Else:

sudo nano /boot/config.txt

Find camera-auto-detect=1 and modify it to camera_auto_detect=0.

At the end of the file, add the following setting statements according to the camera model.

• For the Raspberry Pi Camera V2 with IMX219: dtoverlay=imx219

Using Bookworm

libcamera no more

Reference from this forum post.

The symlinks between libcamera and rpicam are being removed and rpicam is the naming convention that will be used moving forward.